- Assist nanoscientists or engineers in writing process specifications or documentation.
Occupations with related tasks Save Table: XLSX CSV
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications.
- Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks.
- Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems.
- Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems.
- Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products.
- Provide technical support or instruction to staff or customers regarding electronics equipment standards.
- Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities.
- Develop or perform operational, maintenance, or testing procedures for electronic products, components, equipment, or systems.
- Analyze electronics system requirements, capacity, cost, or customer needs to determine project feasibility.
- Inspect electronic equipment, instruments, products, or systems to ensure conformance to specifications, safety standards, or applicable codes or regulations.
- Determine project material or equipment needs.
- Prepare necessary criteria, procedures, reports, or plans for successful conduct of the project with consideration given to site preparation, facility validation, installation, quality assurance, or testing.
- Plan or develop applications or modifications for electronic properties used in components, products, or systems to improve technical performance.
- Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems.
- Prepare budget or cost estimates for equipment, construction, or installation projects or control expenditures.
- Investigate green consumer electronics applications for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Represent employer at conferences, meetings, boards, panels, committees, or working groups to present, explain, or defend findings or recommendations, negotiate compromises or agreements, or exchange information.
- Research or develop new green electronics technologies, such as lighting, optical data storage devices, or energy efficient televisions.
- Prepare documentation containing information such as confidential descriptions or specifications of proprietary hardware or software, product development or introduction schedules, product costs, or information about product performance weaknesses.
- Prepare, review, or maintain maintenance schedules, design documentation, or operational reports or charts.
- Prepare detailed reports or design statements, based on results of validation and qualification tests or reviews of procedures and protocols.
- Prepare, maintain, or review validation and compliance documentation, such as engineering change notices, schematics, or protocols.
- Study product characteristics or customer requirements to determine validation objectives and standards.
- Analyze validation test data to determine whether systems or processes have met validation criteria or to identify root causes of production problems.
- Develop validation master plans, process flow diagrams, test cases, or standard operating procedures.
- Maintain validation test equipment.
- Conduct validation or qualification tests of new or existing processes, equipment, or software in accordance with internal protocols or external standards.
- Communicate with regulatory agencies regarding compliance documentation or validation results.
- Recommend resolution of identified deviations from established product or process standards.
- Design validation study features, such as sampling, testing, or analytical methodologies.
- Prepare validation or performance qualification protocols for new or modified manufacturing processes, systems, or equipment for production of pharmaceuticals, electronics, or other products.
- Create, populate, or maintain databases for tracking validation activities, test results, or validated systems.
- Resolve testing problems by modifying testing methods or revising test objectives and standards.
- Conduct audits of validation or performance qualification processes to ensure compliance with internal or regulatory requirements.
- Draw samples of raw materials, intermediate products, or finished products for validation testing.
- Direct validation activities, such as protocol creation or testing.
- Coordinate the implementation or scheduling of validation testing with affected departments and personnel.
- Participate in internal or external training programs to maintain knowledge of validation principles, industry trends, or novel technologies.
- Validate or characterize sustainable or environmentally friendly products, using electronic testing platforms.
- Assist in training equipment operators or other staff on validation protocols and standard operating procedures.
- Devise automated lab validation test stations or other test fixtures or equipment.
- Prepare detailed reports or design statements, based on results of validation and qualification tests or reviews of procedures and protocols.
- Prepare, maintain, or review validation and compliance documentation, such as engineering change notices, schematics, or protocols.
- Write descriptions of property boundary surveys for use in deeds, leases, or other legal documents.
- Prepare, or supervise preparation of, all data, charts, plots, maps, records, and documents related to surveys.
- Direct or conduct surveys to establish legal boundaries for properties, based on legal deeds and titles.
- Prepare and maintain sketches, maps, reports, and legal descriptions of surveys to describe, certify, and assume liability for work performed.
- Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
- Search legal records, survey records, and land titles to obtain information about property boundaries in areas to be surveyed.
- Record the results of surveys, including the shape, contour, location, elevation, and dimensions of land or land features.
- Compute geodetic measurements and interpret survey data to determine positions, shapes, and elevations of geomorphic and topographic features.
- Calculate heights, depths, relative positions, property lines, and other characteristics of terrain.
- Plan and conduct ground surveys designed to establish baselines, elevations, and other geodetic measurements.
- Establish fixed points for use in making maps, using geodetic and engineering instruments.
- Determine longitudes and latitudes of important features and boundaries in survey areas, using theodolites, transits, levels, and satellite-based global positioning systems (GPS).
- Train assistants and helpers, and direct their work in such activities as performing surveys or drafting maps.
- Coordinate findings with the work of engineering and architectural personnel, clients, and others concerned with projects.
- Analyze survey objectives and specifications to prepare survey proposals or to direct others in survey proposal preparation.
- Testify as an expert witness in court cases on land survey issues, such as property boundaries.
- Adjust surveying instruments to maintain their accuracy.
- Develop criteria for survey methods and procedures.
- Survey bodies of water to determine navigable channels and to secure data for construction of breakwaters, piers, and other marine structures.
- Direct aerial surveys of specified geographical areas.
- Conduct research in surveying and mapping methods, using knowledge of photogrammetric map compilation and electronic data processing.
- Locate and mark sites selected for geophysical prospecting activities, such as efforts to locate petroleum or other mineral products.
- Determine specifications for equipment to be used for aerial photography, as well as altitudes from which to photograph terrain.
- Develop criteria for the design and modification of survey instruments.
- Write descriptions of property boundary surveys for use in deeds, leases, or other legal documents.
- Prepare, or supervise preparation of, all data, charts, plots, maps, records, and documents related to surveys.
- Prepare specifications, designs, or sketches for machines, components, or systems related to the generation, transmission, or use of mechanical or fluid energy.
- Record test procedures and results, numerical and graphical data, and recommendations for changes in product or test methods.
- Conduct failure analyses, document results, and recommend corrective actions.
- Assemble or disassemble complex mechanical systems.
- Interpret engineering sketches, specifications, or drawings.
- Calculate required capacities for equipment of proposed system to obtain specified performance and submit data to engineering personnel for approval.
- Review project instructions and blueprints to ascertain test specifications, procedures, and objectives, and test nature of technical problems such as redesign.
- Provide technical support to other employees regarding mechanical design, fabrication, testing, or documentation.
- Test machines, components, materials, or products to determine characteristics such as performance, strength, or response to stress.
- Draft detail drawing or sketch for drafting room completion or to request parts fabrication by machine, sheet or wood shops.
- Analyze test results in relation to design or rated specifications and test objectives, and modify or adjust equipment to meet specifications.
- Read dials and meters to determine amperage, voltage, electrical output and input at specific operating temperature to analyze parts performance.
- Design molds, tools, dies, jigs, or fixtures for use in manufacturing processes.
- Review project instructions and specifications to identify, modify and plan requirements fabrication, assembly and testing.
- Design specialized or customized equipment, machines, or structures.
- Set up and conduct tests of complete units and components under operational conditions to investigate proposals for improving equipment performance.
- Assist engineers to design, develop, test, or manufacture industrial machinery, consumer products, or other equipment.
- Prepare layouts of machinery, tools, plants, or equipment.
- Prepare equipment inspection schedules, reliability schedules, work plans, or other records.
- Set up prototype and test apparatus and operate test controlling equipment to observe and record prototype test results.
- Evaluate tool drawing designs by measuring drawing dimensions and comparing with original specifications for form and function using engineering skills.
- Analyze energy requirements and distribution systems to maximize the use of intermittent or inflexible renewable energy sources, such as wind or nuclear.
- Prepare parts sketches and write work orders and purchase requests to be furnished by outside contractors.
- Estimate cost factors including labor and material for purchased and fabricated parts and costs for assembly, testing, or installing.
- Assist mechanical engineers in product testing through activities such as setting up instrumentation for automobile crash tests.
- Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
- Analyze or estimate production costs, such as labor, equipment, and plant space.
- Devise, fabricate, or assemble new or modified mechanical components for products such as industrial machinery or equipment, and measuring instruments.
- Discuss changes in design, method of manufacture and assembly, or drafting techniques and procedures with staff and coordinate corrections.
- Monitor, inspect, or test mechanical equipment.
- Prepare specifications, designs, or sketches for machines, components, or systems related to the generation, transmission, or use of mechanical or fluid energy.
- Record test procedures and results, numerical and graphical data, and recommendations for changes in product or test methods.
- Conduct failure analyses, document results, and recommend corrective actions.
- Create or maintain formal engineering documents, such as schematics, bills of materials, components or materials specifications, or packaging requirements.
- Develop formal documentation for microelectromechanical systems (MEMS) devices, including quality assurance guidance, quality control protocols, process control checklists, data collection, or reporting.
- Develop customer documentation, such as performance specifications, training manuals, or operating instructions.
- Create schematics and physical layouts of integrated microelectromechanical systems (MEMS) components or packaged assemblies consistent with process, functional, or package constraints.
- Investigate characteristics such as cost, performance, or process capability of potential microelectromechanical systems (MEMS) device designs, using simulation or modeling software.
- Conduct analyses addressing issues such as failure, reliability, or yield improvement.
- Plan or schedule engineering research or development projects involving microelectromechanical systems (MEMS) technology.
- Propose product designs involving microelectromechanical systems (MEMS) technology, considering market data or customer requirements.
- Communicate operating characteristics or performance experience to other engineers or designers for training or new product development purposes.
- Evaluate materials, fabrication methods, joining methods, surface treatments, or packaging to ensure acceptable processing, performance, cost, sustainability, or availability.
- Refine final microelectromechanical systems (MEMS) design to optimize design for target dimensions, physical tolerances, or processing constraints.
- Conduct harsh environmental testing, accelerated aging, device characterization, or field trials to validate devices, using inspection tools, testing protocols, peripheral instrumentation, or modeling and simulation software.
- Develop or file intellectual property and patent disclosure or application documents related to microelectromechanical systems (MEMS) devices, products, or systems.
- Conduct or oversee the conduct of prototype development or microfabrication activities to ensure compliance to specifications and promote effective production processes.
- Conduct experimental or virtual studies to investigate characteristics and processing principles of potential microelectromechanical systems (MEMS) technology.
- Devise microelectromechanical systems (MEMS) production methods, such as integrated circuit fabrication, lithographic electroform modeling, or micromachining.
- Develop or validate specialized materials characterization procedures, such as thermal withstand, fatigue, notch sensitivity, abrasion, or hardness tests.
- Validate fabrication processes for microelectromechanical systems (MEMS), using statistical process control implementation, virtual process simulations, data mining, or life testing.
- Demonstrate miniaturized systems that contain components, such as microsensors, microactuators, or integrated electronic circuits, fabricated on silicon or silicon carbide wafers.
- Manage new product introduction projects to ensure effective deployment of microelectromechanical systems (MEMS) devices or applications.
- Conduct acceptance tests, vendor-qualification protocols, surveys, audits, corrective-action reviews, or performance monitoring of incoming materials or components to ensure conformance to specifications.
- Develop or implement microelectromechanical systems (MEMS) processing tools, fixtures, gages, dies, molds, or trays.
- Identify, procure, or develop test equipment, instrumentation, or facilities for characterization of microelectromechanical systems (MEMS) applications.
- Develop or validate product-specific test protocols, acceptance thresholds, or inspection tools for quality control testing or performance measurement.
- Oversee operation of microelectromechanical systems (MEMS) fabrication or assembly equipment, such as handling, singulation, assembly, wire-bonding, soldering, or package sealing.
- Consider environmental issues when proposing product designs involving microelectromechanical systems (MEMS) technology.
- Design or develop energy products using nanomaterials or nanoprocesses, such as micro-nano machining.
- Design or develop industrial air quality microsystems, such as carbon dioxide fixing devices.
- Design or develop sensors to reduce the energy or resource requirements to operate appliances, such as washing machines or dishwashing machines.
- Design sensors or switches that require little or no power to operate for environmental monitoring or industrial metering applications.
- Research or develop emerging microelectromechanical (MEMS) systems to convert nontraditional energy sources into power, such as ambient energy harvesters that convert environmental vibrations into usable energy.
- Create or maintain formal engineering documents, such as schematics, bills of materials, components or materials specifications, or packaging requirements.
- Develop formal documentation for microelectromechanical systems (MEMS) devices, including quality assurance guidance, quality control protocols, process control checklists, data collection, or reporting.
- Develop customer documentation, such as performance specifications, training manuals, or operating instructions.
- Design electrical and mechanical systems for avionic instrumentation applications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans, and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Adjust, repair, or replace faulty components of test setups and equipment.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Finish vehicle instrumentation and deinstrumentation.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Design electrical and mechanical systems for avionic instrumentation applications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Record or oversee recording of information to ensure currency of engineering drawings and documentation of production problems.
- Complete production reports, purchase orders, and material, tool, and equipment lists.
- Estimate production costs, cost saving methods, and the effects of product design changes on expenditures for management review, action, and control.
- Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
- Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product.
- Confer with clients, vendors, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status.
- Communicate with management and user personnel to develop production and design standards.
- Evaluate precision and accuracy of production and testing equipment and engineering drawings to formulate corrective action plan.
- Recommend methods for improving utilization of personnel, material, and utilities.
- Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer.
- Direct workers engaged in product measurement, inspection, and testing activities to ensure quality control and reliability.
- Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization.
- Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities.
- Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs.
- Implement methods and procedures for disposition of discrepant material and defective or damaged parts, and assess cost and responsibility.
- Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
- Study operations sequence, material flow, functional statements, organization charts, and project information to determine worker functions and responsibilities.
- Formulate sampling procedures and designs and develop forms and instructions for recording, evaluating, and reporting quality and reliability data.
- Regulate and alter workflow schedules according to established manufacturing sequences and lead times to expedite production operations.
- Schedule deliveries based on production forecasts, material substitutions, storage and handling facilities, and maintenance requirements.
- Record or oversee recording of information to ensure currency of engineering drawings and documentation of production problems.
- Complete production reports, purchase orders, and material, tool, and equipment lists.
- Prepare information regarding design, structure specifications, materials, color, equipment, estimated costs, or construction time.
- Prepare operating and maintenance manuals, studies, or reports.
- Develop final construction plans that include aesthetic representations of the structure or details for its construction.
- Prepare scale drawings or architectural designs, using computer-aided design or other tools.
- Consult with clients to determine functional or spatial requirements of structures.
- Meet with clients to review or discuss architectural drawings.
- Monitor the work of specialists, such as electrical engineers, mechanical engineers, interior designers, or sound specialists to ensure optimal form or function of designs or final structures.
- Integrate engineering elements into unified architectural designs.
- Plan layouts of structural architectural projects.
- Conduct periodic on-site observations of construction work to monitor compliance with plans.
- Prepare contract documents for building contractors.
- Plan or design structures such as residences, office buildings, theatres, factories, or other structural properties in accordance with environmental, safety, or other regulations.
- Direct activities of technicians engaged in preparing drawings or specification documents.
- Administer construction contracts.
- Create three-dimensional or interactive representations of designs, using computer-assisted design software.
- Represent clients in obtaining bids or awarding construction contracts.
- Develop marketing materials, proposals, or presentations to generate new work opportunities.
- Perform predesign services, such as feasibility or environmental impact studies.
- Design structures that incorporate environmentally friendly building practices or concepts, such as Leadership in Energy and Environmental Design (LEED) standards.
- Design or plan construction of green building projects to minimize adverse environmental impact or conserve energy.
- Gather information related to projects' environmental sustainability or operational efficiency.
- Inspect proposed building sites to determine suitability for construction.
- Design environmentally sound structural upgrades to existing buildings, such as natural lighting systems, green roofs, or rainwater collection systems.
- Calculate potential energy savings by comparing estimated energy consumption of proposed design to baseline standards.
- Prepare information regarding design, structure specifications, materials, color, equipment, estimated costs, or construction time.
- Prepare operating and maintenance manuals, studies, or reports.
- Prepare reports, sketches, working drawings, specifications, proposals, and budgets for proposed sites or systems.
- Visit sites to observe environmental problems, to consult with contractors, or to monitor construction activities.
- Meet with clients, such as district or regional councils, farmers, and developers, to discuss their needs.
- Discuss plans with clients, contractors, consultants, and other engineers so that they can be evaluated and necessary changes made.
- Test agricultural machinery and equipment to ensure adequate performance.
- Plan and direct construction of rural electric-power distribution systems, and irrigation, drainage, and flood control systems for soil and water conservation.
- Provide advice on water quality and issues related to pollution management, river control, and ground and surface water resources.
- Design structures for crop storage, animal shelter and loading, and animal and crop processing, and supervise their construction.
- Conduct educational programs that provide farmers or farm cooperative members with information that can help them improve agricultural productivity.
- Design sensing, measuring, and recording devices, and other instrumentation used to study plant or animal life.
- Design agricultural machinery components and equipment, using computer-aided design (CAD) technology.
- Design and supervise environmental and land reclamation projects in agriculture and related industries.
- Design food processing plants and related mechanical systems.
- Supervise food processing or manufacturing plant operations.
- Prepare reports, sketches, working drawings, specifications, proposals, and budgets for proposed sites or systems.
- Document equipment or process details of radio frequency identification device (RFID) technology.
- Identify operational requirements for new systems to inform selection of technological solutions.
- Integrate tags, readers, or software in radio frequency identification device (RFID) designs.
- Perform systems analysis or programming of radio frequency identification device (RFID) technology.
- Test radio frequency identification device (RFID) software to ensure proper functioning.
- Select appropriate radio frequency identification device (RFID) tags and determine placement locations.
- Perform site analyses to determine system configurations, processes to be impacted, or on-site obstacles to technology implementation.
- Perform acceptance testing on newly installed or updated systems.
- Determine means of integrating radio frequency identification device (RFID) into other applications.
- Provide technical support for radio frequency identification device (RFID) technology.
- Collect data about existing client hardware, software, networking, or key business processes to inform implementation of radio frequency identification device (RFID) technology.
- Install, test, or maintain radio frequency identification device (RFID) systems.
- Test tags or labels to ensure readability.
- Determine usefulness of new radio frequency identification device (RFID) technologies.
- Verify compliance of developed applications with architectural standards and established practices.
- Train users in details of system operation.
- Develop process flows, work instructions, or standard operating procedures for radio frequency identification device (RFID) systems.
- Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of industry research about new technologies.
- Define and compare possible radio frequency identification device (RFID) solutions to inform selection for specific projects.
- Create simulations or models of radio frequency identification device (RFID) systems to provide information for selection and configuration.
- Analyze radio frequency identification device (RFID)-related supply chain data.
- Document equipment or process details of radio frequency identification device (RFID) technology.
- Make system device lists or event timing charts.
- Review or approve designs, calculations, or cost estimates.
- Process or interpret signals or sensor data.
- Debug robotics programs.
- Build, configure, or test robots or robotic applications.
- Create back-ups of robot programs or parameters.
- Provide technical support for robotic systems.
- Design end-of-arm tooling.
- Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems.
- Supervise technologists, technicians, or other engineers.
- Design software to control robotic systems for applications, such as military defense or manufacturing.
- Conduct research on robotic technology to create new robotic systems or system capabilities.
- Investigate mechanical failures or unexpected maintenance problems.
- Integrate robotics with peripherals, such as welders, controllers, or other equipment.
- Evaluate robotic systems or prototypes.
- Install, calibrate, operate, or maintain robots.
- Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions.
- Document robotic application development, maintenance, or changes.
- Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials.
- Write algorithms or programming code for ad hoc robotic applications.
- Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations.
- Plan mobile robot paths and teach path plans to robots.
- Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs.
- Automate assays on laboratory robotics.
- Make system device lists or event timing charts.
- Create or maintain photonic design histories.
- Analyze system performance or operational requirements.
- Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems.
- Develop or test photonic prototypes or models.
- Design, integrate, or test photonics systems or components.
- Assist in the transition of photonic prototypes to production.
- Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field.
- Write reports or proposals related to photonics research or development projects.
- Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components.
- Determine applications of photonics appropriate to meet product objectives or features.
- Conduct research on new photonics technologies.
- Design electro-optical sensing or imaging systems.
- Document photonics system or component design processes, including objectives, issues, or outcomes.
- Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency.
- Train operators, engineers, or other personnel.
- Analyze, fabricate, or test fiber-optic links.
- Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices.
- Oversee or provide expertise on manufacturing, assembly, or fabrication processes.
- Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices.
- Design solar energy photonics or other materials or devices to generate energy.
- Design or redesign optical fibers to minimize energy loss.
- Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes.
- Develop laser-processed designs, such as laser-cut medical devices.
- Design or develop new crystals for photonics applications.
- Design laser machining equipment for purposes such as high-speed ablation.
- Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment.
- Create or maintain photonic design histories.
- Write performance requirements for product development or engineering projects.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Recommend design modifications to eliminate machine or system malfunctions.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Provide technical customer service.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Provide feedback to design engineers on customer problems or needs.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design test control apparatus or equipment or develop procedures for testing products.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Solicit new business.
- Write performance requirements for product development or engineering projects.
- Compile and maintain records documenting engineering schematics, installed equipment, installation or operational problems, resources used, repairs, or corrective action performed.
- Modify, maintain, or repair electronics equipment or systems to ensure proper functioning.
- Replace defective components or parts, using hand tools and precision instruments.
- Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems.
- Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
- Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts.
- Assemble electrical systems or prototypes, using hand tools or measuring instruments.
- Review electrical engineering plans to ensure adherence to design specifications and compliance with applicable electrical codes and standards.
- Assemble, test, or maintain circuitry or electronic components, according to engineering instructions, technical manuals, or knowledge of electronics, using hand or power tools.
- Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material.
- Maintain system logs or manuals to document testing or operation of equipment.
- Select electronics equipment, components, or systems to meet functional specifications.
- Calculate design specifications or cost, material, and resource estimates, and prepare project schedules and budgets.
- Educate equipment operators on the proper use of equipment.
- Supervise the installation or operation of electronic equipment or systems.
- Modify electrical prototypes, parts, assemblies, or systems to correct functional deviations.
- Integrate software or hardware components, using computer, microprocessor, or control architecture.
- Procure parts and maintain inventory and related documentation.
- Participate in training or continuing education activities to stay abreast of engineering or industry advances.
- Research equipment or component needs, sources, competitive prices, delivery times, or ongoing operational costs.
- Provide user applications or engineering support or recommendations for new or existing equipment with regard to installation, upgrades, or enhancements.
- Specify, coordinate, or conduct quality control or quality assurance programs or procedures.
- Produce electronics drawings or other graphics representing industrial control, instrumentation, sensors, or analog or digital telecommunications networks, using computer-aided design (CAD) software.
- Install or maintain electrical control systems, industrial automation systems, or electrical equipment, including control circuits, variable speed drives, or programmable logic controllers.
- Design or modify engineering schematics for electrical transmission and distribution systems or for electrical installation in residential, commercial, or industrial buildings, using computer-aided design (CAD) software.
- Interpret test information to resolve design-related problems.
- Conduct statistical studies to analyze or compare production costs for sustainable or nonsustainable designs.
- Construct and evaluate electrical components for consumer electronics applications such as fuel cells for consumer electronic devices, power saving devices for computers or televisions, or energy efficient power chargers.
- Participate in the development or testing of electrical aspects of new green technologies, such as lighting, optical data storage devices, and energy efficient televisions.
- Review, develop, or prepare maintenance standards.
- Compile and maintain records documenting engineering schematics, installed equipment, installation or operational problems, resources used, repairs, or corrective action performed.
- Assemble documentation packages and produce drawing sets to be checked by an engineer or an architect.
- Draft detail and assembly drawings of design components, circuitry or printed circuit boards, using computer-assisted equipment or standard drafting techniques and devices.
- Draft working drawings, wiring diagrams, wiring connection specifications, or cross-sections of underground cables, as required for instructions to installation crew.
- Review completed construction drawings and cost estimates for accuracy and conformity to standards and regulations.
- Consult with engineers to discuss or interpret design concepts, or determine requirements of detailed working drawings.
- Confer with engineering staff and other personnel to resolve problems.
- Measure factors that affect installation and arrangement of equipment, such as distances to be spanned by wire and cable.
- Design electrical systems, such as lighting systems.
- Draw master sketches to scale showing relation of proposed installations to existing facilities and exact specifications and dimensions.
- Review work orders or procedural manuals and confer with vendors or design staff to resolve problems or modify design.
- Locate files relating to specified design project in database library, load program into computer, and record completed job data.
- Examine electronic schematics and supporting documents to develop, compute, and verify specifications for drafting data, such as configuration of parts, dimensions, or tolerances.
- Compare logic element configuration on display screen with engineering schematics and calculate figures to convert, redesign, or modify element.
- Review blueprints to determine customer requirements and consult with assembler regarding schematics, wiring procedures, or conductor paths.
- Study work order requests to determine type of service, such as lighting or power, demanded by installation.
- Explain drawings to production or construction teams and provide adjustments, as necessary.
- Reproduce working drawings on copy machines or trace drawings in ink.
- Generate computer tapes of final layout design to produce layered photo masks or photo plotting design onto film.
- Determine the order of work and the method of presentation, such as orthographic or isometric drawing.
- Visit proposed installation sites and draw rough sketches of location.
- Key and program specified commands and engineering specifications into computer system to change functions and test final layout.
- Copy drawings of printed circuit board fabrication using print machine or blueprinting procedure.
- Select drill size to drill test head, according to test design and specifications, and submit guide layout to designated department.
- Plot electrical test points on layout sheets and draw schematics for wiring test fixture heads to frames.
- Write technical reports and draw charts that display statistics and data.
- Supervise and coordinate work activities of workers engaged in drafting, designing layouts, assembling, or testing printed circuit boards.
- Train students to use drafting machines and to prepare schematic diagrams, block diagrams, control drawings, logic diagrams, integrated circuit drawings, or interconnection diagrams.
- Prepare and interpret specifications, calculating weights, volumes, or stress factors.
- Supervise or train other technologists, technicians, or drafters.
- Use computer-aided drafting equipment or conventional drafting stations, technical handbooks, tables, calculators, or traditional drafting tools, such as boards, pencils, protractors, or T-squares.
- Assemble documentation packages and produce drawing sets to be checked by an engineer or an architect.
- Complete detailed source and method notes describing the location of routine or complex land parcels.
- Position and hold the vertical rods, or targets, that theodolite operators use for sighting to measure angles, distances, and elevations.
- Check all layers of maps to ensure accuracy, identifying and marking errors and making corrections.
- Design or develop information databases that include geographic or topographic data.
- Monitor mapping work or the updating of maps to ensure accuracy, inclusion of new or changed information, or compliance with rules and regulations.
- Produce or update overlay maps to show information boundaries, water locations, or topographic features on various base maps or at different scales.
- Determine scales, line sizes, or colors to be used for hard copies of computerized maps, using plotters.
- Compile information necessary to stake projects for construction, using engineering plans.
- Identify and compile database information to create requested maps.
- Operate and manage land-information computer systems, performing tasks such as storing data, making inquiries, and producing plots and reports.
- Compare survey computations with applicable standards to determine adequacy of data.
- Analyze aerial photographs to detect and interpret significant military, industrial, resource, or topographical data.
- Research and combine existing property information to describe property boundaries in relation to adjacent properties, taking into account parcel splits, combinations, or land boundary adjustments.
- Calculate latitudes, longitudes, angles, areas, or other information for mapmaking, using survey field notes or reference tables.
- Compare topographical features or contour lines with images from aerial photographs, old maps, or other reference materials to verify the accuracy of their identification.
- Trace contours or topographic details to generate maps that denote specific land or property locations or geographic attributes.
- Provide assistance in the development of methods and procedures for conducting field surveys.
- Trim, align, and join prints to form photographic mosaics, maintaining scaled distances between reference points.
- Answer questions and provide information to the public or to staff members regarding assessment maps, surveys, boundaries, easements, property ownership, roads, zoning, or similar matters.
- Adjust and operate surveying instruments such as prisms, theodolites, electronic distance measuring equipment, or electronic data collectors.
- Collect information needed to carry out new surveys, using source maps, previous survey data, photographs, computer records, or other relevant information.
- Conduct surveys to ascertain the locations of natural features and man-made structures on the Earth's surface, underground, and underwater, using electronic distance-measuring equipment, such as GPS, and other surveying instruments.
- Enter Global Positioning System (GPS) data, legal deeds, field notes, or land survey reports into geographic information system (GIS) workstations so that information can be transformed into graphic land descriptions, such as maps and drawings.
- Perform calculations to determine earth curvature corrections, atmospheric impacts on measurements, traverse closures or adjustments, azimuths, level runs, or placement of markers.
- Prepare cost estimates for mapping projects.
- Prepare topographic or contour maps of land surveyed, including site features and other relevant information, such as charts, drawings, and survey notes.
- Record survey measurements or descriptive data, using notes, drawings, sketches, or inked tracings.
- Search for section corners, property irons, or survey points.
- Set out and recover stakes, marks, or other monumentation.
- Supervise or coordinate activities of workers engaged in surveying, plotting data, drafting maps, or producing blueprints, photostats, or photographs.
- Complete detailed source and method notes describing the location of routine or complex land parcels.