- Coordinate preventive programs to control the outbreak of wildlife diseases.
Occupations with related tasks Save Table: XLSX CSV
- Direct the purchase, modification, installation, testing, maintenance, and operation of fire prevention and protection systems.
- Advise architects, builders, and other construction personnel on fire prevention equipment and techniques and on fire code and standard interpretation and compliance.
- Inspect buildings or building designs to determine fire protection system requirements and potential problems in areas such as water supplies, exit locations, and construction materials.
- Design fire detection equipment, alarm systems, and fire extinguishing devices and systems.
- Prepare and write reports detailing specific fire prevention and protection issues, such as work performed, revised codes or standards, and proposed review schedules.
- Consult with authorities to discuss safety regulations and to recommend changes as necessary.
- Determine causes of fires and ways in which they could have been prevented.
- Develop plans for the prevention of destruction by fire, wind, and water.
- Develop training materials and conduct training sessions on fire protection.
- Attend workshops, seminars, or conferences to present or obtain information regarding fire prevention and protection.
- Evaluate fire department performance and the laws and regulations affecting fire prevention or fire safety.
- Study the relationships between ignition sources and materials to determine how fires start.
- Conduct research on fire retardants and the fire safety of materials and devices.
- Direct the purchase, modification, installation, testing, maintenance, and operation of fire prevention and protection systems.
- Direct or support quality improvement projects or safety programs.
- Diagnose, treat, or provide continuous care to hospital inpatients.
- Prescribe medications or treatment regimens to hospital inpatients.
- Order or interpret the results of tests such as laboratory tests and radiographs (x-rays).
- Admit patients for hospital stays.
- Conduct discharge planning and discharge patients.
- Write patient discharge summaries and send them to primary care physicians.
- Refer patients to medical specialists, social services, or other professionals as appropriate.
- Direct, coordinate, or supervise the patient care activities of nursing or support staff.
- Attend inpatient consultations in areas of specialty.
- Communicate with patients' primary care physicians upon admission, when treatment plans change, or at discharge to maintain continuity and quality of care.
- Participate in continuing education activities to maintain or enhance knowledge and skills.
- Direct the operations of short stay or specialty units.
- Train or supervise medical students, residents, or other health professionals.
- Direct or support quality improvement projects or safety programs.
- Direct engineering activities, ensuring compliance with environmental, safety, or other governmental regulations.
- Manage and direct the construction, operations, or maintenance activities at project site.
- Inspect project sites to monitor progress and ensure conformance to design specifications and safety or sanitation standards.
- Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications.
- Plan and design transportation or hydraulic systems or structures, using computer-assisted design or drawing tools.
- Provide technical advice to industrial or managerial personnel regarding design, construction, program modifications, or structural repairs.
- Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data.
- Direct or participate in surveying to lay out installations or establish reference points, grades, or elevations to guide construction.
- Estimate quantities and cost of materials, equipment, or labor to determine project feasibility.
- Prepare or present public reports on topics such as bid proposals, deeds, environmental impact statements, or property and right-of-way descriptions.
- Design energy-efficient or environmentally sound civil structures.
- Test soils or materials to determine the adequacy and strength of foundations, concrete, asphalt, or steel.
- Identify environmental risks and develop risk management strategies for civil engineering projects.
- Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact.
- Develop or implement engineering solutions to clean up industrial accidents or other contaminated sites.
- Design or engineer systems to efficiently dispose of chemical, biological, or other toxic wastes.
- Direct engineering activities, ensuring compliance with environmental, safety, or other governmental regulations.
- Implement and coordinate mine safety programs, including the design and maintenance of protective and rescue equipment and safety devices.
- Prepare technical reports for use by mining, engineering, and management personnel.
- Inspect mining areas for unsafe structures, equipment, and working conditions.
- Select or develop mineral location, extraction, and production methods, based on factors such as safety, cost, and deposit characteristics.
- Select locations and plan underground or surface mining operations, specifying processes, labor usage, and equipment that will result in safe, economical, and environmentally sound extraction of minerals and ores.
- Prepare schedules, reports, and estimates of the costs involved in developing and operating mines.
- Monitor mine production rates to assess operational effectiveness.
- Supervise, train, and evaluate technicians, technologists, survey personnel, engineers, scientists or other mine personnel.
- Examine maps, deposits, drilling locations, or mines to determine the location, size, accessibility, contents, value, and potential profitability of mineral, oil, and gas deposits.
- Design, implement, and monitor the development of mines, facilities, systems, or equipment.
- Test air to detect toxic gases and recommend measures to remove them, such as installation of ventilation shafts.
- Devise solutions to problems of land reclamation and water and air pollution, such as methods of storing excavated soil and returning exhausted mine sites to natural states.
- Lay out, direct, and supervise mine construction operations, such as the construction of shafts and tunnels.
- Design, develop, and implement computer applications for use in mining operations such as mine design, modeling, or mapping or for monitoring mine conditions.
- Select or devise materials-handling methods and equipment to transport ore, waste materials, and mineral products efficiently and economically.
- Evaluate data to develop new mining products, equipment, or processes.
- Design mining and mineral treatment equipment and machinery in collaboration with other engineering specialists.
- Conduct or direct mining experiments to test or prove research findings.
- Implement and coordinate mine safety programs, including the design and maintenance of protective and rescue equipment and safety devices.
- Direct environmental compliance activities associated with nuclear plant operations or maintenance.
- Design or develop nuclear equipment, such as reactor cores, radiation shielding, or associated instrumentation or control mechanisms.
- Monitor nuclear facility operations to identify any design, construction, or operation practices that violate safety regulations and laws or could jeopardize safe operations.
- Initiate corrective actions or order plant shutdowns in emergency situations.
- Examine accidents to obtain data for use in design of preventive measures.
- Direct operating or maintenance activities of nuclear power plants to ensure efficiency and conformity to safety standards.
- Design or oversee construction or operation of nuclear reactors, power plants, or nuclear fuels reprocessing and reclamation systems.
- Write operational instructions to be used in nuclear plant operation or nuclear fuel or waste handling and disposal.
- Prepare technical reports of findings or recommendations, based on synthesized analyses of test results.
- Prepare environmental impact statements, reports, or presentations for regulatory or other agencies.
- Develop or contribute to the development of plans to remediate or restore environments affected by nuclear radiation, such as waste disposal sites.
- Conduct tests of nuclear fuel behavior and cycles or performance of nuclear machinery and equipment to optimize performance of existing plants.
- Design fuel cycle models or processes to reduce the quantity of radioactive waste generated from nuclear activities.
- Consult with other scientists to determine parameters of experimentation or suitability of analytical models.
- Recommend preventive measures to be taken in the handling of nuclear technology, based on data obtained from operations monitoring or from evaluation of test results.
- Discuss construction project proposals with interested parties, such as vendors, contractors, or nuclear facility review boards.
- Perform experiments that will provide information about acceptable methods of nuclear material usage, nuclear fuel reclamation, or waste disposal.
- Conduct environmental studies on topics such as nuclear power generation, nuclear waste disposal, or nuclear weapon deployment.
- Design or direct nuclear research projects to develop, test, modify, or discover new uses for theoretical models.
- Keep abreast of developments and changes in the nuclear field by reading technical journals or by independent study and research.
- Direct environmental compliance activities associated with nuclear plant operations or maintenance.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions.
- Recommend design modifications to eliminate machine or system malfunctions.
- Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications.
- Provide technical customer service.
- Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications.
- Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software.
- Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems.
- Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
- Provide feedback to design engineers on customer problems or needs.
- Write performance requirements for product development or engineering projects.
- Estimate costs or submit bids for engineering, construction, or extraction projects.
- Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges.
- Recommend the use of utility or energy services that minimize carbon footprints.
- Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers.
- Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering.
- Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems.
- Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution.
- Evaluate mechanical designs or prototypes for energy performance or environmental impact.
- Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.
- Design test control apparatus or equipment or develop procedures for testing products.
- Solicit new business.
- Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
- Design complete hull and superstructure according to specifications and test data, in conformity with standards of safety, efficiency, and economy.
- Supervise other engineers and crew members and train them for routine and emergency duties.
- Study design proposals and specifications to establish basic characteristics of craft, such as size, weight, speed, propulsion, displacement, and draft.
- Perform monitoring activities to ensure that ships comply with international regulations and standards for life-saving equipment and pollution preventatives.
- Oversee construction and testing of prototype in model basin and develop sectional and waterline curves of hull to establish center of gravity, ideal hull form, and buoyancy and stability data.
- Evaluate performance of craft during dock and sea trials to determine design changes and conformance with national and international standards.
- Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
- Check, test, and maintain automatic controls and alarm systems.
- Design layout of craft interior, including cargo space, passenger compartments, ladder wells, and elevators.
- Evaluate operation of marine equipment during acceptance testing and shakedown cruises.
- Act as liaisons between ships' captains and shore personnel to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
- Conduct environmental, operational, or performance tests on marine machinery and equipment.
- Inspect marine equipment and machinery to draw up work requests and job specifications.
- Prepare, or direct the preparation of, product or system layouts and detailed drawings and schematics.
- Investigate and observe tests on machinery and equipment for compliance with standards.
- Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
- Design and oversee testing, installation, and repair of marine apparatus and equipment.
- Prepare technical reports for use by engineering, management, or sales personnel.
- Procure materials needed to repair marine equipment and machinery.
- Maintain contact with, and formulate reports for, contractors and clients to ensure completion of work at minimum cost.
- Maintain and coordinate repair of marine machinery and equipment for installation on vessels.
- Confer with research personnel to clarify or resolve problems and to develop or modify designs.
- Conduct analytical, environmental, operational, or performance studies to develop designs for products, such as marine engines, equipment, and structures.
- Determine conditions under which tests are to be conducted, as well as sequences and phases of test operations.
- Review work requests and compare them with previous work completed on ships to ensure that costs are economically sound.
- Analyze data to determine feasibility of product proposals.
- Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.
- Conduct analyses of ships, such as stability, structural, weight, and vibration analyses.
- Establish arrangement of boiler room equipment and propulsion machinery, heating and ventilating systems, refrigeration equipment, piping, and other functional equipment.
- Coordinate activities with regulatory bodies to ensure repairs and alterations are at minimum cost and consistent with safety.
